74GTLP22033DGGRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 175MHz |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 40mA |
| Current - Output | 100mA |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 8.8 ns |
| Family | GTLP |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Prop. Delay@Nom-Sup | 7.4 ns |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTLP & LVTTL |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
74GTLP22033DGGRE4 Overview
In the TSSOP package, it is embedded.Level translators is packaged in the way of Tape and Reel.Usually, when a transmission line is terminated, there are 48 termination points used.Level translators is powered from a supply voltage of 3.3V.With 48 pins, it is equipped with a minimal number of connections.With 48 pins, it is designed.The design of this electronic part contains 8 bits.3.45V is the maximum voltage it supports.In order for the machine to operate, the supply voltage must be 3.15V.This mount is done using the method of Surface Mount.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.In terms of electronic devices, this one is in the GTLP family.For maximum efficiency, the supply voltage should be set to 3.3V.Its characteristics include AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS.Level translators is recommended to operate at a temperature higher than -40°C.Operating temperatures should be below 85°C.Devices in this family contain 1 elements.In addition to its maximum design flexibility, 100mA features the lowest output current.In this case, the frequency is 175MHz.
74GTLP22033DGGRE4 Features
TSSOP package
48 pin count
48 pins
1 elements
74GTLP22033DGGRE4 Applications
There are a lot of Texas Instruments 74GTLP22033DGGRE4 voltage translators & level shifters applications.
- Eliminate slow or noisy input signals
- Test Site
- Monitors
- Data and Clock Transmission Over Backplane
- Temperature Ranges (1)
- Driving indicator LEDs or buzzers
- Products With Many I
- Extended Product Life Cycle
- Motor Drives
- Available in Military (–55°C/125°C) Temperature Range
