banner_page

74GTLP22033DGVRE4

8 Bit LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver 3.3V -40°C~85°C Specialty Logic IC 74GTLP Series 74GTLP22033 48 Pin 0.4mm 3.15V~3.45V 48-TFSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74GTLP22033DGVRE4
  • Package: 48-TFSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 783
  • Description: 8 Bit LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver 3.3V -40°C~85°C Specialty Logic IC 74GTLP Series 74GTLP22033 48 Pin 0.4mm 3.15V~3.45V 48-TFSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.173, 4.40mm Width)
Number of Pins 48
Weight 123.490523mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74GTLP
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Additional Feature AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.15V~3.45V
Terminal Pitch 0.4mm
Frequency 175MHz
Base Part Number 74GTLP22033
Pin Count 48
Operating Supply Voltage 3.45V
Power Supplies 3.3V
Number of Ports 2
Output Current 100mA
Number of Bits 8
Logic Function Transceiver
Direction Bidirectional
Output Characteristics OPEN-DRAIN/3-STATE
Logic Type LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver
Output Polarity INVERTED
Max I(ol) 0.012 A
Prop. Delay@Nom-Sup 7.4 ns
Trigger Type POSITIVE EDGE
Control Type INDEPENDENT CONTROL
Power Supply Current-Max (ICC) 40mA
Translation GTLP & LVTTL
Height Seated (Max) 1.2mm
Length 9.7mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74GTLP22033DGVRE4 Overview


Tape & Reel (TR) is employed as a way of packaging.It is accessible to the 48-TFSOP (0.173, 4.40mm Width) package.The voltage of 3.15V~3.45V is supplied to make sure that the device is able to operate normally.A Surface Mount mounting method is used for mounting electronic parts.It is set to operate at a temperature of -40°C~85°C.Approximately 8 bits of information can be stored in the memory.74GTLP series electronic parts are similar in many ways.Based on the 74GTLP22033 base part number, many related parts can be found.In total, there are 48 pins on the component.Through 48 terminations, signals are prevented from reflecting off the end of transmission lines.Using Surface Mount, it is mounted.It is constructed with 48 pins.As a key factor in its operation, the voltage supply to 3.45V plays an important role.It is necessary to maintain the power supplies of 3.3V so that they can be used conveniently.In AO OUTPUTS HAVE EQUIVALENT 26-OHM SERIES RESISTORS, it performs well.It contains 2 ports.It employs TAPE AND REEL for its packing.It uses INDEPENDENT CONTROL as a control type.There is 175MHz frequency associated with it.Power supply current is kept to a maximum of 40mA.During operation, the current output is 100mA.

74GTLP22033DGVRE4 Features



74GTLP22033DGVRE4 Applications


There are a lot of Texas Instruments 74GTLP22033DGVRE4 Specialty Logic ICs applications.

  • Wireless network systems
  • Pocket PC
  • Wireless smart house
  • Point-to-point networking
  • Fiber-to-the-desktop
  • Shortwave receiver
  • Low power, low voltage systems
  • Wireless HD Photography
  • Wireless 3D game
  • SONET/SDH Network

Write a review

Note: HTML is not translated!
    Bad           Good