74GTLPH1612DGGRE4
| Parameters | |
|---|---|
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH1612 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Output Current | 100mA |
| Number of Bits | 18 |
| Propagation Delay | 7.7 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Output Polarity | TRUE |
| Max I(ol) | 0.1 A |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 45mA |
| Translation | GTL/P & LVTTL |
| Height Seated (Max) | 1.2mm |
| Length | 17mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
74GTLPH1612DGGRE4 Overview
The package 64-TFSOP (0.240, 6.10mm Width) contains this file embedded in it. Tape & Reel (TR) is the way it is packaged. A 18-Bit-circuit is used to provide its superior flexibility. This electrical device is of the Universal Bus Transceiver logic type. This electronic part is mounted in the way of Surface Mount. A higher operating temperature than -40°C~85°C is recommended. In addition, 24mA 24mA features the highest level of flexibility in its design due to its high and low output currents. It is a type of FPGA belonging to the 74GTLPH series. The supply voltage is 3.15V~3.45V. It is a member of the 74GTLPH1612 family. The 64 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. It is important to keep the supply voltage above 3.3V for normal operation. There are a total of 96 pins on this device. This electronic part is designed with 18 Bits. An example of this is through the use of 2 terminations, where a particular device is used to end a transmission line with an impedance matching device, fitted with its characteristic impedance. This electronic part is mounted in the way of Surface Mount. A 64-pin is used for its design. At this point, Vsup reaches its maximum value. A higher supply voltage (Vsup) should be used than the lower supply voltage (3.15V). POSITIVE EDGE is used with the trigger. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design. In terms of design flexibility, 100mA features a high output current. There is a supply voltage of 3.3V that is used to power this electrical part.
74GTLPH1612DGGRE4 Features
64-TFSOP (0.240, 6.10mm Width) package
74GTLPH series
74GTLPH1612 family
64 pin count
64 pins
74GTLPH1612DGGRE4 Applications
There are a lot of Texas Instruments 74GTLPH1612DGGRE4 Universal Bus Functions applications.
- Data transfer
- Analog ICs
- Remote monitoring
- Residual current/leakage current protection
- CD player
- Air conditioner
- Safety thermostat
- Push button switches
- Scanner
- Digital watch
