Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
252.792698mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
74GTLPH |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
175MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74GTLPH1645 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
3.3V |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Number of Ports |
2 |
Nominal Supply Current |
40mA |
Output Current |
100mA |
Number of Bits |
16 |
Propagation Delay |
5.8 ns |
Turn On Delay Time |
9.4 ns |
Logic Function |
Transceiver, Translator |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS TRANSCEIVER |
High Level Output Current |
-24mA |
Channel Type |
Bidirectional |
Low Level Output Current |
100mA |
Control Type |
COMMON CONTROL |
Output Signal |
GTLP |
Translator Type |
Mixed Signal |
Input Signal |
LVTTL |
Channels per Circuit |
8 |
Height |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Thickness |
1.15mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74GTLPH1645DGGRG4 Overview
There is an embedded version of it in package 56-TFSOP (0.240, 6.10mm Width).Level translators is packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Its translator type is Mixed Signal.This electronic part is mounted in the way of Surface Mount.There is Bidirectional channel type for this electrical device.There is -40°C~85°C TA operating temperature.0 terminations are used to end transmission lines.The base part number 74GTLPH1645 can be used to find its related parts.In order for it to operate, it needs to be powered by a voltage of 3.3V.The pin count of this device is 56.There are a number of devices in the 74GTLPH series.Designed with 56 pins, it is compatible with a wide range of devices.There are 16 bits in this electronic part.There is a maximum voltage of 3.45V supported.A minimal voltage of 3.15V is needed to operate it.The mount method is Surface Mount.As part of Bus Driver/Transceivers, it belongs.There is BUS TRANSCEIVER logic IC in it.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Based on its reliable performance, this device is suitable for TR.Because it features a 100mA output current, maximum design flexibility can be achieved.A high level of efficiency is achieved by maintaining the supply voltage at 3.3V.This device has a total of 2 elements.175MHz is the frequency at which this can be achieved.
74GTLPH1645DGGRG4 Features
56-TFSOP (0.240, 6.10mm Width) package
56 pin count
74GTLPH series
56 pins
2 elements
74GTLPH1645DGGRG4 Applications
There are a lot of Texas Instruments 74GTLPH1645DGGRG4 voltage translators & level shifters applications.
- Handset
- PMBus
- Product Traceability
- Smartphone
- Monitors
- Industrial Equipment
- Enterprise
- Industrial equipment
- Wearable Health and Fitness Devices
- Debouncing a Mechanical Switch