74GTLPH16612GRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 5V SUPPLY |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 18 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7.8 ns |
| Family | GTLP |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
74GTLPH16612GRE4 Overview
In the package TSSOP, it can be found.The package is in the form of Tape and Reel.A transmission line can be terminated with 56 terminations.There is a voltage supply of 3.3V which powers the device.A total of 56 pins are included.56 pins are used in its design.The design of this electronic part contains 18 bits.Supports a voltage of 5.25V as its maximum supply voltage.This device requires a minimum voltage of 3.15V.The way of mounting this electronic part is Surface Mount.Channels are set to 18.As part of Bus Driver/Transceivers, this part is included.The logic IC it adopts is REGISTERED BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the GTLP family.Powered by a 3.35V battery, it can run for an extended period of time.There are also characteristics of ALSO REQUIRES 5V SUPPLY associated with it.-40°C is the minimum operating temperature.Level translators is recommended to work at a temperature lower than 85°C.There are 1 elements in it.
74GTLPH16612GRE4 Features
TSSOP package
56 pin count
56 pins
3.35V power supplies
1 elements
74GTLPH16612GRE4 Applications
There are a lot of Texas Instruments 74GTLPH16612GRE4 voltage translators & level shifters applications.
- Telecom
- One Assembly and Test Site
- Available in Military (-55°C to 125°C)
- Motor Drives
- Debouncing a Mechanical Switch
- Tablet PCs
- Signaling Level Conversion for Clock or Data
- Notebook
- Electronic Points of Sale
- Test Site
