74GTLPH16927GRG4
| Parameters | |
|---|---|
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 18 |
| Propagation Delay | 6.5 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.05 A |
| Trigger Type | POSITIVE EDGE |
| Channel Type | Bidirectional |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH16927 |
| Pin Count | 56 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.45V |
| Power Supplies | 3.3V |
| Number of Channels | 18 |
| Number of Circuits | 1 |
74GTLPH16927GRG4 Overview
Embedded in the 56-TFSOP (0.240, 6.10mm Width) package, it is available for you to use.A package of Tape & Reel (TR) has been used.Tri-State, Non-Inverted is the output configured for it.Mixed Signal is the translator type of this electrical device.Level translators is mounted according to the Surface Mount method.There is Bidirectional channel type for this electrical device.The operating temperature is -40°C~85°C TA.1 circuits are used to provide this superior level of flexibility.Transmission lines can be terminated using 56 terminations to end them.Parts that are related to 74GTLPH16927 can be identified based on its base part number.Power comes from a voltage of 3.3V.Pin count is 56.This is a device from the 74GTLPH series.Level translators is designed wLevel translatorsh 56 pins.This electronic part is designed with 18 Bits.There are a total of 18 channels.I would classify it as part of the group of Bus Driver/Transceivers.Level translators uses the logic IC REGISTERED BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.3.3V power supplies are required to run it.This device is well suited for TAPE AND REEL based on its reliable performance.The output current of 50mA makes it feature maximum design flexibility.High efficiency requires maintaining the supply voltage at 3.45V.
74GTLPH16927GRG4 Features
56-TFSOP (0.240, 6.10mm Width) package
1 circuits
56 pin count
74GTLPH series
56 pins
3.3V power supplies
74GTLPH16927GRG4 Applications
There are a lot of Texas Instruments 74GTLPH16927GRG4 voltage translators & level shifters applications.
- Servers
- Routers (Telecom Switching Equipment)
- Wearable Health and Fitness Devices
- Debouncing a Mechanical Switch
- Extended Product-Change Notification
- Telecommunications
- One Fabrication Site
- Product Traceability
- PMBus
- Available in Military (–55°C/125°C) Temperature Range
