banner_page

74GTLPH16945GRE4

48 pinsTape & Reel (TR) 3.3V VVoltage Translators & Level Shifters TSSOP 1


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74GTLPH16945GRE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 491
  • Description: 48 pinsTape & Reel (TR) 3.3V VVoltage Translators & Level Shifters TSSOP 1 (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 48
Weight 223.195796mg
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature WITH DIRECTION CONTROL
Subcategory Bus Driver/Transceivers
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 175MHz
Pin Count 48
Operating Supply Voltage 3.3V
Number of Elements 2
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Number of Ports 2
Nominal Supply Current 50mA
Current - Output 50mA
Number of Bits 16
Propagation Delay 6.3 ns
Turn On Delay Time 6.9 ns
Family GTLP
Logic Function Transceiver, Translator
Direction Bidirectional
Output Characteristics 3-STATE
Logic IC Type BUS TRANSCEIVER
Max I(ol) 0.05 A
Control Type COMMON CONTROL
Translation GTL/P & LVTTL
Width 6.1mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

74GTLPH16945GRE4 Overview


Embedded in the TSSOP package, it is available for you to use.A Tape & Reel (TR) package is used to package it.To end a transmission line, there are 48 types of termination that can be used.There is a voltage supply of 3.3V which powers the device.Level translators is equipped wLevel translatorsh 48 pin count.The pin configuration of the device is 48.This electronic part is designed with 16 Bits.3.45V is the maximum voltage it supports.A minimal voltage of 3.15V is needed to operate it.This electronic part is mounted in the way of Surface Mount.This part is included in Bus Driver/Transceivers.The logic IC it adopts is BUS TRANSCEIVER.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.GTLP is the family name of this electronic device.This device has been rated to be suitable for TAPE AND REEL based upon the reliability of its performance.High efficiency requires a voltage supply of 3.3V.In addition, it is characterized by WITH DIRECTION CONTROL.Temperatures above -40°C are recommended.The operating temperature should be lower than 85°C.Level shifter consists of 2 elements.Because it features 50mA output current, maximum design flexibility can be achieved.Frequency 175MHz can be achieved.

74GTLPH16945GRE4 Features


TSSOP package
48 pin count
48 pins
2 elements

74GTLPH16945GRE4 Applications


There are a lot of Texas Instruments 74GTLPH16945GRE4 voltage translators & level shifters applications.

  • Telematics
  • Data and Clock Transmission Over Backplane
  • Driving indicator LEDs or buzzers
  • Push-pull level shifting (UART, SPI, JTAG, and so forth)
  • Extended Product Life Cycle
  • Wireless and Telecom Infrastructures
  • Extended Product Life Cycle
  • General purpose I/O level shifting
  • One Assembly
  • LCD Panels Using GIP / GOA / ASG Technology

Write a review

Note: HTML is not translated!
    Bad           Good