banner_page

74GTLPH16945GRG4

48 pinsTape & Reel (TR) 3.3V VVoltage Translators & Level Shifters TSSOP 1


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74GTLPH16945GRG4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 275
  • Description: 48 pinsTape & Reel (TR) 3.3V VVoltage Translators & Level Shifters TSSOP 1 (Kg)

Details

Tags

Parameters
Package / Case TSSOP
Surface Mount YES
Number of Pins 48
Weight 223.195796mg
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature WITH DIRECTION CONTROL
HTS Code 8542.39.00.01
Subcategory Bus Driver/Transceivers
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 175MHz
Pin Count 48
Operating Supply Voltage 3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Number of Ports 2
Nominal Supply Current 50mA
Current - Output 50mA
Number of Bits 16
Propagation Delay 6.3 ns
Family GTLP
Logic Function Transceiver, Translator
Direction Bidirectional
Output Characteristics 3-STATE
Output Polarity TRUE
Logic IC Type BUS TRANSCEIVER
Max I(ol) 0.05 A
Control Type COMMON CONTROL
Translation GTL/P & LVTTL
Height Seated (Max) 1.2mm
Length 12.5mm
Width 6.1mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

74GTLPH16945GRG4 Overview


Level translators is embedded in the TSSOP package.The package is in the form of Tape & Reel (TR).Usually, when a transmission line is terminated, there are 48 termination points used.Level translators is powered by a 3.3V supply.48 pins are present on this board.The board has 48 pins.The design of this electronic part is based on 16 bits.Supports a voltage of 3.45V as its maximum supply voltage.A minimal voltage of 3.15V is needed to operate it.In Bus Driver/Transceivers, this part is included.A BUS TRANSCEIVER logic IC is used.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.GTLP is the family of this electronic device.The reliability of this device indicates its suitability for TAPE AND REEL as a result of its reliable performance.High efficiency requires maintaining the supply voltage at 3.3V.WITH DIRECTION CONTROL are other characteristics of it.Temperatures above -40°C should be used.There should be a temperature below 85°C at which the system is operating.Because it features 50mA output current, maximum design flexibility can be achieved.The frequency that can be achieved is 175MHz.

74GTLPH16945GRG4 Features


TSSOP package
48 pin count
48 pins

74GTLPH16945GRG4 Applications


There are a lot of Texas Instruments 74GTLPH16945GRG4 voltage translators & level shifters applications.

  • PMBus
  • Wearable Health and Fitness Devices
  • Driving indicator LEDs or buzzers
  • Routers (routing equipment)
  • Driving Indicator LEDs or Buzzers
  • One Fabrication Site
  • Telematics
  • Power-sensitive applications
  • Extended Product Life Cycle
  • Available in Military (-55°C to 125°C)

Write a review

Note: HTML is not translated!
    Bad           Good