74GTLPH306DGVRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLPH306 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 20mA |
| Output Current | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Logic Function | Transceiver, Translator |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 50mA |
| Control Type | COMMON CONTROL |
| Output Signal | GTLP |
| Translator Type | Mixed Signal |
| Input Signal | LVTTL |
| Channels per Circuit | 8 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74GTLPH306DGVRE4 Overview
In the 24-TFSOP (0.173, 4.40mm Width) package, it is embedded.A Tape & Reel (TR) package is used to package it.Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.Mixed Signal is the translator type of this electrical device.Surface Mount is the method used for mounting this electronic part.A Bidirectional channel type is associated with this electrical device.Level translators is -40°C~85°C TA at the operating temperature.1 circuits are used to achieve its superior flexibility.To end a transmission line, there are 24 types of termination that can be used.Parts related to a base part number 74GTLPH306 are designated by the same number.Level translators is powered from a supply voltage of 3.3V.With 24 pins, it is equipped with a minimal number of connections.The device is part of the 74GTLPH series.24 pins are used in its design.8 Bits are used in the design of this electronic part.There is a maximum voltage of 3.45V supported.The minimal supply voltage is 3.15V.The way of mounting this electronic part is Surface Mount.Bus Driver/Transceivers contains this part.The logic IC it adopts is BUS TRANSCEIVER.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.TR is well suited to this device because of its reliability.Featuring a 50mA output current, its design flexibility is maximized.High efficiency requires maintaining the supply voltage at 3.3V.There is 175MHz frequency that can be achieved.
74GTLPH306DGVRE4 Features
24-TFSOP (0.173, 4.40mm Width) package
1 circuits
24 pin count
74GTLPH series
24 pins
74GTLPH306DGVRE4 Applications
There are a lot of Texas Instruments 74GTLPH306DGVRE4 voltage translators & level shifters applications.
- General purpose I/O level shifting
- Telematics
- Temperature Ranges (1)
- Telecom
- Product Traceability
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- I2C / SMBus
- Debouncing a mechanical switch
- Controlled Baseline
- Routers (Telecom Switching Equipment)
