74HC107N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Supplier Device Package | 14-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | JK Type |
| Voltage - Supply | 2V~6V |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 85MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC107N,652 Overview
As a result, it is packaged as 14-DIP (0.300, 7.62mm). The package Tubecontains it. This output is configured with Differential. This trigger uses the value Negative Edge. In this case, the electronic component is mounted in the way of Through Hole. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at -40°C~125°C TA. There is JK Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74HCseries FPGA. It should not exceed 85MHzin its output frequency. D latch consists of 2 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. This T flip flop has a capacitance of 3.5pF farads at the input.
74HC107N,652 Features
Tube package
74HC series
74HC107N,652 Applications
There are a lot of Rochester Electronics, LLC 74HC107N,652 Flip Flops applications.
- Shift registers
- Supports Live Insertion
- Frequency division
- Safety Clamp
- ATE
- Guaranteed simultaneous switching noise level
- CMOS Process
- Latch
- Balanced Propagation Delays
- Digital electronics systems
