74HC107N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC107 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 48 ns |
| fmax-Min | 60 MHz |
| RoHS Status | ROHS3 Compliant |
74HC107N,652 Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. There is an embedded version in the package Tube. This output is configured with Differential. This trigger is configured to use Negative Edge. In this case, the electronic component is mounted in the way of Through Hole. With a supply voltage of 2V~6V volts, it operates. Temperature is set to -40°C~125°C TA. This D latch has the type JK Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. A frequency of 85MHzshould be the maximum output frequency. There are 2 elements in it. This process consumes 4μA quiescents. There are 14 terminations,The object belongs to the 74HC107 family. Power is provided by a 5V supply. Its input capacitance is 3.5pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. This device is part of the FF/Latchesbase part number family. Vsup reaches its maximum value at 6V. Normal operation requires a supply voltage (Vsup) above 2V.
74HC107N,652 Features
Tube package
74HC series
74HC107N,652 Applications
There are a lot of NXP USA Inc. 74HC107N,652 Flip Flops applications.
- Data Synchronizers
- Power down protection
- Load Control
- EMI reduction circuitry
- Communications
- Balanced Propagation Delays
- High Performance Logic for test systems
- Common Clocks
- ESD performance
- Asynchronous counter
