74HC107PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-TSSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 85MHz |
| Base Part Number | 74HC107 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Clock Frequency | 85MHz |
| Propagation Delay | 27 ns |
| Logic Function | JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| High Level Output Current | 5.2mA |
| Input Capacitance | 3.5pF |
| Low Level Output Current | 5.2mA |
| Clock Edge Trigger Type | Negative Edge |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC107PW-Q100J Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). This output is configured with Differential. In the configuration of the trigger, Negative Edgeis used. It is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. In this case, the operating temperature is -40°C~125°C TA. JK Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 85MHz Hz. D latch consists of 2 elements. As a result, it consumes 4μA quiescent current. The 74HC107 family contains it. Its input capacitance is 3.5pFfarads. There is an electronic component mounted in the way of Surface Mount. It is designed with 14 pins. This device's clock edge trigger type is Negative Edge. If high efficiency is desired, the supply voltage should be kept at 5V. 5.2mAis set as the high level output current. There is no low level output current set at 5.2mA. Temperatures below 125°Care ideal for operating. It should be higher than -40°Cwhen the system is operating. We are able to achieve a frequency of 85MHz.
74HC107PW-Q100J Features
Tape & Reel (TR) package
74HC series
14 pins
74HC107PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC107PW-Q100J Flip Flops applications.
- Automotive
- Modulo – n – counter
- Test & Measurement
- Memory
- Power down protection
- Common Clocks
- Single Up Count-Control Line
- Counters
- High Performance Logic for test systems
- Shift Registers
