74HC112N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | JK Type |
| Voltage - Supply | 2V~6V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 71MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC112N,652 Overview
It is packaged in the way of 16-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. It is configured with Differentialas an output. This trigger is configured to use Negative Edge. There is an electronic component mounted in the way of Through Hole. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at -40°C~125°C TA. JK Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74HC series. You should not exceed 71MHzin the output frequency of the device. In total, there are 2 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. This JK flip flop has a 3.5pFfarad input capacitance.
74HC112N,652 Features
Tube package
74HC series
74HC112N,652 Applications
There are a lot of Rochester Electronics, LLC 74HC112N,652 Flip Flops applications.
- Memory
- Bus hold
- Individual Asynchronous Resets
- Automotive
- Guaranteed simultaneous switching noise level
- QML qualified product
- Divide a clock signal by 2 or 4
- Asynchronous counter
- Instrumentation
- 2 – Bit synchronous counter
