74HC123DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSO |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Max Supply Current | 8μA |
| Propagation Delay | 65ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 385 ns |
| Family | HC/UH |
| Logic Function | Multivibrator |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Independent Circuits | 2 |
| Schmitt Trigger Input | No |
| Number of Data/Clock Inputs | 2 |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74HC123DB,112 Overview
Multivibrator is packaged in 16-SSOP (0.209, 5.30mm Width) case.When packing equipment for Tube, it is advisable to take it along with you.Surface Mount mounting is recommended.This part has Monostable as its logic type.Multivibrator is provided in a quantMultivibratory of 2V~6V.A 74HC series component includes this electrical component.Multivibrator is not permMultivibratorted to operate this part below -40°C~125°C°F.There is a small current output of 5.2mA 5.2mA while there is a large voltage output from 5.2mA 5.2mA.A 74HC123-family component is used to design the component.There are a total of 16 terminations.There is no problem handling voltages up to 5V.The device has a 2 input for clocks or data.Multivibrator consists of a total of five 16 pins on the part.HC/UH family is the family that it belongs to.16 pins are included in the specification for the part.Surface Mount mounts the device on top of the base.The minimum supply voltage must be greater than 2V if the supply voltage is to exceed 2V.There is a quiescent current consumption at 8μA.5V volts of voltage is required to run this chip.For the chip to operate properly, a voltage supply of 6V volts needs to be provided to it.The part's additional features can be searched here: RETRIGGERABLE; TRIGGERABLE FROM CLEAR INPUT ALSOA maximum supply current of 8μA can be handled by this device.
74HC123DB,112 Features
in 16-SSOP (0.209, 5.30mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74HC
based on 74HC123
Supply Voltage: 5V
Quiescent Current at 8μA
74HC123DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC123DB,112 applications of multivibrators.
- GPS: Personal Navigation Devices
- Time-delay applications
- Frequency discriminators
- Solid-State Drive (SSD): Client and Enterprise
- Digital Radio and Internet Radio Players
- Astable multivibrator
- Personal Digital Assistant (PDA)
- Frequency multiplication
- Frequency division
- Desktop PCs or Notebook PCs
