74HC137DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Additional Feature | ADDRESS LATCHES |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC137 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 285 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | LATCHED |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC137DB,118 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SSOP (0.209, 5.30mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.The operating temperature of -40°C~125°C will not be susceptible to external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74HC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.The part number for 74HC137 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.Among the family of HC/UH the logic switch is a member.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.Without the influence of external factors, it consumes 8μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.To accept voltage levels, the multiplexers have3 input lines.A signal source is provided by 8 output lines.Furthermore, the characteristics of ADDRESS LATCHES have been improved.
74HC137DB,118 Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
ADDRESS LATCHES
74HC137DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC137DB,118 Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Make full adder
- Logic gates for other digital devices
- High-performance memory-decoding applications
- Enabling different rows of memory depending on address in memory chips
- Video transmission
- Speed control of medern motors
- Analog to digital conversion
- Combinational circuit
- Data bus control
