Parameters |
Number of Terminations |
16 |
Type |
Decoder/Demultiplexer |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74HC138 |
Pin Count |
16 |
Number of Outputs |
8 |
Operating Supply Voltage |
5V |
Circuit |
1 x 3:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Power Dissipation |
500mW |
Propagation Delay |
225 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
225 ns |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer |
Number of Inputs |
3 |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Input Conditioning |
STANDARD |
Length |
9.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
200.686274mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
Series |
74HC |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
74HC138D-Q100,118 Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74HC series, which provide extensive application potential.It is designed with 16 terminations as part of its basic configuration.The base part number is 74HC138, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch has 16 component pins.A conductor terminates at GULL WING.Its supply type is Single, which is used as the source of power.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of HC/UH.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 6V.There are 8 outputs designed for the operation of the turn signal switch.There are no external influences on this multiplexer ic, so it consumes 8μA current.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 3 inputs.
74HC138D-Q100,118 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74HC138D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC138D-Q100,118 Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- Communication system
- Microprocessor instruction decoding
- Electronics industry
- Medium scale TV wall
- Injectors
- Implementing boolean functions with multiple variables
- To select different devices in microprocessor input
- Recording transmission
- Code converters