74HC138PW-Q100,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 225 ns |
| Quiescent Current | 8μA |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC138PW-Q100,118 Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Mounting is performed using Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.As long as the operating temperature is -40°C~125°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.As a member of 74HC series, the multiplexers can be used for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.There is a base part number of 74HC138 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 16 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.A total of 16 pins are configured on this board.The mounting is in the way of Surface Mount.In the HC/UH family, the logic switch is included.Keeping the minimum supply voltage (Vsup) at 2V prevents some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.The turn signal switch has 8 outputs.No external influence consumes 8μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.In this multiplexer, there is a total of 3 inputs.
74HC138PW-Q100,118 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74HC138PW-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC138PW-Q100,118 Signal Switches / Multiplexers / Decoders applications.
- Small scale TV wall
- HD surveillance system
- Frequency multiplexing system
- Injectors
- VGA
- Relay
- Code conversion
- Electronics industry
- Enabling block of memory depending on address in memory chips
- Enabling different functions units in microprocessor instruction decoding
