74HC138PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC138 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC138PW,112 Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tube is the packaging method.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~6V.provides digital controlled switch's digital controlled switch'sMultiplexers from the 74HC series can be used in a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.The base part number is 74HC138, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 16 can be found on this turn signal switch.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.Currently, it is configured with a 16 pin configuration.Surface Mount is the way it is mounted.There is a family of HC/UH members.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 6V in order to prevent some unnecessary failures.Without the influence of external factors, it consumes 8μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The multiplexers have 3 input lines used to accept voltage levels.A signal source has 8 output lines.
74HC138PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74HC138PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC138PW,112 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory systems
- High-performance memory-decoding applications
- Speed control of medern motors
- Speed synchronization of multiple motors in industries
- Data transfer
- Steel plants
- Electronics industry
- Microprocessor instruction decoding
- Recording transmission
- HD surveillance system
