74HC138PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC138 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC138PW,118 Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) represents its packaging.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HC series, they can be used in a wide variety of applications.There is a design for terminating 16 as part of its basic configuration.The part number for 74HC138 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.In this case, the supply type is Single.The board has 16 pins configured.The mounting is in the way of Surface Mount.The logic switch is included into the family of HC/UH.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.It consumes 8μA current of multiplexer ic since it is not affected by external factors.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The multiplexers have 3 input lines used to accept voltage levels.A signal source has 8 output lines.
74HC138PW,118 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74HC138PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC138PW,118 Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Automation system
- Data bus control
- Night vision cameras
- Microprocessor input/output systems
- Enabling different functions units in microprocessor instruction decoding
- Signal router
- A/D converters
- Audio transmission
- Analog to digital conversion
