74HC138S16-13
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 3 |
| Propagation Delay | 41 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 6 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Digi-Reel® |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
74HC138S16-13 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Digi-Reel?.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74HC series.Among its basic configurations are 16 terminations.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.It is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.There are 3 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.The digital switch ic is an electronic part classified into Decoder/Drivers.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.According to TAPE AND REEL, the switches is packaged.In order to accept voltage levels, the multiplexers have input lines 6 on the board.A signal source is provided by 8 output lines.
74HC138S16-13 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
6 input lines
8 output lines
74HC138S16-13 Applications
There are a lot of Diodes Incorporated 74HC138S16-13 Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Automatic health monitoring systems
- Computer memory
- Solenoid cooling fan
- A robotic vehicle with the metal detector
- Time division multiplexing system
- Electronics industry
- Microprocessor instruction decoding
- Automatic Monitoring systems
- Code converters
