74HC139D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC139 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 12 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Screening Level | AEC-Q100 |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
74HC139D-Q100J Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.When the operating temperature is kept at -40°C~125°C, the machine will not be sensturn signal switchive to external influences.Design engineers have more flexibility when digital controlled switch operates at 2V~6V voltage.Multiplexers in the 74HC series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.In addition, it also has a base part number of 74HC139, which can be used to find related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.A configuration of 16 pins is used.It is positioned in the direction of Surface Mount.There is a family of HC/UH members.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The multiplexers have3 input lines on the board that accept voltage levels.As a signal source, there are 8 output lines.
74HC139D-Q100J Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74HC139D-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC139D-Q100J Signal Switches / Multiplexers / Decoders applications.
- Relay
- Make half adder
- HDMI applications
- Textile mills
- Steel plants
- Data transfer
- Speed synchronization of multiple motors in industries
- PCIe
- Data-routing applications
- Code conversion
