74HC151PW-Q100,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Power Dissipation | 500mW |
| Number of Bits | 8 |
| Propagation Delay | 255 ns |
| Turn On Delay Time | 310 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC151PW-Q100,118 Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.The turn signal switch is designed for use with a 2V~6V supply voltage, which gives it a lot of flexibility.The multiplexers from 74HC series can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74HC151, which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 16 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.This multiplexer ic has 16 pins configured.It is positioned in the direction of Surface Mount.The logic switch belongs to the family of HC/UH.As a result, signal multiplexer provides a total of 8 bits.Vsup should be kept at 2V to prevent some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The turn signal switch has 1 outputs designed for operation.On the multiplexers, 2 input lines are provided for accepting voltage levels.
74HC151PW-Q100,118 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
2 input lines
74HC151PW-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC151PW-Q100,118 Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Idle motor
- Time division multiplexing system
- Telephone network
- Automation system
- Transmission from the computer system of a satellite
- Video transmission
- Data demultiplexing
- Electronically controlled engine system
- War field flying robot with a night vision flying camera
