Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2010 |
Series |
74HC |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC151 |
Pin Count |
16 |
Number of Outputs |
1 |
Operating Supply Voltage |
5V |
Circuit |
1 x 8:1 |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Power Dissipation |
500mW |
Propagation Delay |
31 ns |
Family |
HC/UH |
Logic Function |
Multiplexer, Mux |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Output Polarity |
COMPLEMENTARY |
Number of Input Lines |
8 |
Voltage Supply Source |
Single Supply |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
74HC151PW,112 Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in a way that is referred to as Tube.Mounting is performed using Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.These multiplexers are members of the 74HC series, which provide extensive application potential.Among its basic configurations are 16 terminations.You can also find related parts by using its logic switch base part number of 74HC151.For multiplexer's system, a voltage of 5V is supplied.There are 16 component pins in this turn signal switch.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.With 16 pins, it is configured.It is positioned in the direction of Surface Mount.The logic switch is included into the family of HC/UH.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.As a result, the turn signal switch consists of 1 outputs.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.It is possible to accept voltage levels by using one of the 8 input lines of multiplexers.
74HC151PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
8 input lines
74HC151PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC151PW,112 Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Recording transmission
- Audio transmission
- Enabling block of memory depending on address in memory chips
- PCIe
- Metal detectors
- CPU memory location identification
- Code conversion
- Video transmission
- Memory system of computers