74HC153D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Propagation Delay | 14 ns |
| Family | HC/UH |
| Logic Function | Demultiplexer, Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Number of Input Lines | 12 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC153D,652 Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in the way of Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74HC series multiplexers.The basic configuration of this system includes 16 terminations.There is a base part number 74HC153 that can be used to locate signal switch's related components as well.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 16 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.A total of 16 pins are configured on this board.It is mounted in the way of Surface Mount.Among the family of HC/UH the logic switch is a member.Keeping Vsup at 2V will prevent some unwanted failures.The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A multiplexer such as this has 8 inputs available.The multiplexers have 12 input lines used to accept voltage levels.There are 2 output lines on the signal source.
74HC153D,652 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
12 input lines
2 output lines
74HC153D,652 Applications
There are a lot of Nexperia USA Inc. 74HC153D,652 Signal Switches / Multiplexers / Decoders applications.
- VGA
- Microprocessor input/output systems
- LVDS
- Idle motor
- CPU memory location identification
- Telephone network
- Home automation system
- Data bus control
- Recording transmission
- Frequency multiplexing system
