74HC153PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 25 ns |
| Family | HC/UH |
| Logic Function | Multiplexer, Mux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC153PW,112 Overview
As a means of saving space, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tube.Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~125°C.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.Since they are members of the 74HC series, they can be used in a wide variety of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74HC153, so you can find its logic switch related parts using that number.The multiplexer's system works with 5V voltage.Signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 16 pins.Surface Mount is the way it is mounted.The HC/UH family includes the logic switch.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The multiplexers have 8 input lines used to accept voltage levels.There are 2 output lines on the signal source.
74HC153PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
8 input lines
2 output lines
74HC153PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC153PW,112 Signal Switches / Multiplexers / Decoders applications.
- Communication system
- To select different devices in microprocessor output
- Recording transmission
- Electronically controlled engine system
- Idle motor
- High-performance memory-decoding applications
- Memory chips
- Used to connect a single source to multiple destinations
- Electronics industry
- Implementing boolean functions with multiple variables
