74HC161DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 330 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 48MHz |
| Timing | Asynchronous/Synchronous |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC161DB,118 Overview
A 16-SSOP (0.209, 5.30mm Width)package is used for this device. It is configured with 16terminations. 5Vis enabled to operate in an extremely flexible manner due to its supply voltage. A wire connects the 1elements. A total of 16pins are available on all components. In this case, it is packaged as Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. The HC/UHfamily is derived from it. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~125°C. This device is mounted in a Surface Mountmanner. In the case of a supply voltage of [0], it operates more reliably. An array consists of 4bits for each element. It is important to note that in regards to this electronic device, TCO OUTPUTis an extremely significant feature. Its base part number, [0], contains more related parts. To operate, it requires a supply voltage of [0]. In the case of the supply voltage (Vsup), it can be as low as 2V. Up to 6Vis the maximum supply voltage (Vsup). During quiescent mode, it consumes 8μA current.
74HC161DB,118 Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
74HC161DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC161DB,118 Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Frequency dividing circuits
- Decade counter/decimal decode display (CD4017B）
- ALGEBRAIC COMPUTATION
- Clocks
- Frequency dividers
- SQUARING
- Communications Digital Frequency Synthesizers;
- counting/frequency sy nthesizers-BCD output
