74HC163DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 185 ns |
| Turn On Delay Time | 320 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 55MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC163DB,118 Overview
A 16-SSOP (0.209, 5.30mm Width)package is used for this device. It is configured with 16terminations. The supply voltage of 5V permits it to operate with full flexibility. There are 1 terminations on the device. A total of 16pins are available on all components. Tape & Reel (TR)is the packaging method used for this package. As part of the circuit, there are 16pins used to connect other components. Using [0], it can be mounted. The HC/UHfamily includes it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. Binary Counteris used as the logic type. The operating temperature should be set at -40°C~125°C. This device is mounted in a Surface Mountmanner. Providing a voltage of 2V~6Vensures higher reliability of operation. There is information in the device in the form of 4bits. A major feature of this electronic device is its [0]. The base part number of 74HC163provides access to more related parts. It takes supply voltage of 5V to operate. Supply voltages can be as low as 2V volts (Vsup). It is possible to provide a voltage up to 6V (Vsup). 4input lines are used to input binary data as on/off signals.
74HC163DB,118 Features
Embedded in the 16-SSOP (0.209, 5.30mm Width) package
TCO OUTPUT
Operating supply voltage of 5V
74HC163DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC163DB,118 Counters & Dividers applications.
- Control counters
- SQUARING
- Programmable binary and decade
- Clocks
- MULTIPLICATION
- counting/frequency sy nthesizers-BCD output
- Counter control/timers
- Programmable decade counters
- TRUE RMS-TO-DC CONVERSION
- ALGEBRAIC COMPUTATION
