74HC163PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 51MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC163 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 185 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 320 ns |
| Reset | Synchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 55MHz |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC163PW,118 Overview
16-TSSOP (0.173, 4.40mm Width)is a package in which this device is packaged. This configuration uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. 1 elements are interconnected in wires. A total of 16pins are available on all components. There is a package in the form of Tape & Reel (TR). Circuit components are connected with 16pins. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. It is adopted that the logic type is [0]. -40°C~125°Cis the recommended operating temperature. There is a mounting type of Surface Mounton this device. When the supply voltage is set to [0], it is able to operate with greater reliability. The device contains information consisting of 4bits. These electronic devices have many important features, and TCO OUTPUTis one of them. Under its base part number of [0], you will find additional related parts. The device requires a supply voltage of [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. In this case, the frequency is 51MHz Hz. There is 6V maximum supply voltage (Vsup) allowed. There is a quiescent current consumption at 8μA. Input binary data is made by using the 4input lines.
74HC163PW,118 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 51MHz
74HC163PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC163PW,118 Counters & Dividers applications.
- Programmable binary and decade
- ALGEBRAIC COMPUTATION
- Time Out Timer for Consumer-Application Industrial Controls
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- TRUE RMS-TO-DC CONVERSION
- Divide-by-N counting
- MULTIPLICATION
- Time delay circuits
- ANALOG SIGNAL PROCESSING
- Timing applications
