74HC173N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 95MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC173N,652 Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. It is contained within the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. Through Holeis in the way of this electric part. The supply voltage is set to 2V~6V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74HCseries of FPGAs. A frequency of 95MHzshould not be exceeded by its output. In total, it contains 1 elements. There is 4μA quiescent consumption. You can search similar parts based on 74HC173. The input capacitance of this JK flip flopis 3.5pF farads.
74HC173N,652 Features
Tube package
74HC series
74HC173N,652 Applications
There are a lot of NXP USA Inc. 74HC173N,652 Flip Flops applications.
- Synchronous counter
- Buffer registers
- Bus hold
- Power down protection
- Bounce elimination switch
- ATE
- Count Modes
- Load Control
- 2 – Bit synchronous counter
- Frequency division
