74HC174D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 107MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 250 ns |
| fmax-Min | 24 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC174D-Q100J Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 2V~6Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74HC series. It should not exceed 107MHzin its output frequency. A total of 1elements are present in it. It consumes 8μA of quiescent There are 16 terminations,It is a member of the 74HC174 family. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 3.5pF farads. An electronic device belonging to the family HC/UHcan be found here. Basically, it is designed with a set of 16 pins. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency.
74HC174D-Q100J Features
Tape & Reel (TR) package
74HC series
16 pins
74HC174D-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC174D-Q100J Flip Flops applications.
- Pattern generators
- Synchronous counter
- Memory
- Power down protection
- Matched Rise and Fall
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch
- Counters
- Divide a clock signal by 2 or 4
- Balanced Propagation Delays
