74HC174D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 25mA |
| Clock Frequency | 107MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 50 ns |
| fmax-Min | 20 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HC174D,652 Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). A package named Tubeincludes it. T flip flop is configured with an output of Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. A 2V~6Vsupply voltage is required for it to operate. A temperature of -40°C~125°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74HCseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 107MHz. In total, it contains 1 elements. There is 8μA quiescent consumption. There are 16 terminations,The object belongs to the 74HC174 family. A voltage of 5V is used to power it. Its input capacitance is 3.5pFfarads. It belongs to the family of electronic devices known as HC/UH. The electronic flip flop is designed with pins 16. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. As a result of its output current of 25mA, it is very flexible in terms of design.
74HC174D,652 Features
Tube package
74HC series
16 pins
74HC174D,652 Applications
There are a lot of Nexperia USA Inc. 74HC174D,652 Flip Flops applications.
- QML qualified product
- Buffer registers
- Bus hold
- Test & Measurement
- Common Clocks
- ESD protection
- Single Up Count-Control Line
- Memory
- Pattern generators
- Balanced Propagation Delays
