74HC174D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 107MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 6 |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC174D,653 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Non-Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HC series. You should not exceed 107MHzin its output frequency. In total, it contains 1 elements. 16terminations have occurred. D latch belongs to the 74HC174 family. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pFfarads. This D flip flop belongs to the family of HC/UH. A part of the electronic system is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This flip flop is designed with 6 Bits. It reaches the maximum supply voltage (Vsup) at 6V. Normal operation requires a supply voltage (Vsup) above 2V. For high efficiency, the supply voltage should be kept at 5V. There are 6 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. There is a consumption of 8μAof quiescent current from it.
74HC174D,653 Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
74HC174D,653 Applications
There are a lot of Nexperia USA Inc. 74HC174D,653 Flip Flops applications.
- Balanced 24 mA output drivers
- Single Up Count-Control Line
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
- Safety Clamp
- Matched Rise and Fall
- Counters
- Supports Live Insertion
- Instrumentation
- Latch-up performance
