74HC174N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 107MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC174N,652 Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). You can find it in the Tubepackage. The output it is configured with uses Non-Inverted. This trigger uses the value Positive Edge. It is mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. Currently, the operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74HCseries contain this type of chip. It should not exceed 107MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded.
74HC174N,652 Features
Tube package
74HC series
74HC174N,652 Applications
There are a lot of Rochester Electronics, LLC 74HC174N,652 Flip Flops applications.
- Event Detectors
- Modulo – n – counter
- Single Down Count-Control Line
- Buffered Clock
- ATE
- Latch-up performance
- Data storage
- Balanced Propagation Delays
- Reduced system switching noise
- Convert a momentary switch to a toggle switch
