74HC174PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 25mA |
| Number of Bits | 6 |
| Clock Frequency | 107MHz |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 16 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC174PW,118 Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. It is included in the package Tape & Reel (TR). T flip flop uses Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. A 2V~6Vsupply voltage is required for it to operate. It is operating at -40°C~125°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 107MHz. A total of 1 elements are present. Currently, there are 16 terminations. It is a member of the 74HC174 family. It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 3.5pF farads. In this case, the D flip flop belongs to the HC/UHfamily. A part of the electronic system is mounted in the way of Surface Mount. The 16pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. It is designed with a number of bits of 6. In this case, the maximum supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. For high efficiency, the supply voltage should be kept at 5V. The output current of 25mA makes it feature maximum design flexibility. 6input lines are available for you to choose from. This D latch consumes 8μA quiescent current at all.
74HC174PW,118 Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
74HC174PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC174PW,118 Flip Flops applications.
- Test & Measurement
- Functionally equivalent to the MC10/100EL29
- Event Detectors
- Latch-up performance
- 2 – Bit synchronous counter
- Supports Live Insertion
- Instrumentation
- Digital electronics systems
- Individual Asynchronous Resets
- Memory
