74HC175D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Output Current | 25mA |
| Clock Frequency | 89MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 265 ns |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HC175D,652 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). The package Tubecontains it. It is configured with Differentialas an output. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HC series. You should not exceed 89MHzin the output frequency of the device. The element count is 1 . As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 16 terminations. You can search similar parts based on 74HC175. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3.5pFfarads. It belongs to the family of electronic devices known as HC/UH. It is designed with 16 pins. Vsup reaches its maximum value at 6V. Normally, the supply voltage (Vsup) should be above 2V. It offers maximum design flexibility with its output current of 25mA.
74HC175D,652 Features
Tube package
74HC series
16 pins
74HC175D,652 Applications
There are a lot of Nexperia USA Inc. 74HC175D,652 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Control circuits
- Convert a momentary switch to a toggle switch
- Safety Clamp
- Consumer
- Counters
- Buffer registers
- Data transfer
- Registers
- Computing
