74HC175N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 89MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 265 ns |
| Max Frequency@Nom-Sup | 20000000Hz |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC175N,652 Overview
As a result, it is packaged as 16-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. As configured, the output uses Differential. It is configured with the trigger Positive Edge. Through Holeis occupied by this electronic component. The supply voltage is set to 2V~6V. A temperature of -40°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74HC series. A frequency of 89MHzshould be the maximum output frequency. There are 1 elements in it. There is a consumption of 8μAof quiescent energy. The number of terminations is 16. The 74HC175 family contains it. The power source is powered by 4.5V. The input capacitance of this JK flip flopis 3.5pF farads. Devices in the HC/UHfamily are electronic devices. There is a FF/Latchesbase part number assigned to the RS flip flops. 6Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 2V for normal operation. A reliable performance of this D flip flop makes it well suited for use in BULK PACK. A total of 2/6V power supplies are needed to run it.
74HC175N,652 Features
Tube package
74HC series
2/6V power supplies
74HC175N,652 Applications
There are a lot of NXP USA Inc. 74HC175N,652 Flip Flops applications.
- Safety Clamp
- Buffer registers
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Test & Measurement
- Registers
- Automotive
- Synchronous counter
- Load Control
- ATE
