74HC238PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Decoder/Demultiplexer |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC238 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Quiescent Current | 8μA |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC238PW-Q100J Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Since they are members of the 74HC series, they can be used in a wide variety of applications.In addition, it also has a base part number of 74HC238, which can be used to find related parts.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Surface Mount.Not being affected by the external factors, consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.Signal switch operation at 125°C temperature is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.Based on the device specifications, the signal switches is designed to operate at 6V maximum supply voltage.A minimum supply voltage of 2V is required to operate the digital swith.
74HC238PW-Q100J Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74HC238PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC238PW-Q100J Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Automatic health monitoring systems
- High-performance memory-decoding applications
- D/A converters
- Metal detectors
- Make full adder
- Arithmetic Logic Units
- Enabling block of memory depending on address in memory chips
- Seven segment displays
- Textile mills
