74HC238PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2015 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC238 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 240 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 240 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC238PW,112 Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tube.Surface Mount is the mounting method digital switch ic uses.Decoder/Demultiplexer is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Using a 2V~6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74HC series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74HC238, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch contains 16 component pins.As a result, conductors end at GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.It is mounted in the way of Surface Mount.There is a family of HC/UH members.Keeping Vsup at 2V will prevent some unwanted failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.There are no external influences on this multiplexer ic, so it consumes 8μA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.It is possible to accept voltage levels by using one of the 3 input lines of multiplexers.In this case, the signal source has a total of 8 output lines.
74HC238PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74HC238PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC238PW,112 Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Microprocessor input/output systems
- VGA
- Computer memory
- Memory system of computers
- Home automation system
- Automatic health monitoring systems
- High-performance memory systems
- Encrypted communications system
- Speed synchronization of multiple motors in industries
