74HC243D,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Bulk |
| Published | 2001 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC243 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Family | HC/UH |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Transceiver, Non-Inverting |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 27 ns |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HC243D,112 Overview
Logical driver uses a neat 14-SOIC (0.154, 3.90mm Width) package. Bulk external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a HC/UH family part that is attached to this electronic component. 14 pins are set with the electric part. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. You can search "74HC243" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. It is recommended to use a 2/6V power supply. To supply the device, a minimum voltage of 2V is a must. Logical driver features WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need.
74HC243D,112 Features
Bus Driver/Transceivers
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
74HC243D,112 Applications
There are a lot of NXP USA Inc. 74HC243D,112 Buffers & Transceivers applications.
- Gigabit Ethernet
- Wireless interactive experience
- Car alarm systems
- Changeing the frequency from IF to RF
- Wireless transmission
- Sensor reporting
- Solenoids
- Cell phones
- Telecom and datacom networking applications
- Carrier phase observations
