74HC251DB-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Multiplexer |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC251 |
| Circuit | 1 x 8:1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 18 ns |
| Logic Function | Multiplexer |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| High Level Output Current | 5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| RoHS Status | RoHS Compliant |
74HC251DB-Q100J Overview
For the purpose of saving board space, digital switch is included in the 16-SSOP (0.209, 5.30mm Width).It is packaged in the way of Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Multiplexer.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.There is a base part number of 74HC251 which can also be used in order to locate the logic switch that are related to this item.This supply type employs Single.There are 16 pins on it.The mounting point is Surface Mount.It is possible to accept voltage levels by using one of the 8 input lines of multiplexers.Signal sources consist of output lines of 8.The maximum operating temperature of 125°C is acceptable for this signal switch.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The relevant device specification specifies a maximum supply voltage of 6V for the signal switches.A minimum supply voltage of 2V is specified for the digital swith in accordance with its applicable specifications.
74HC251DB-Q100J Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
8 input lines
8 output lines
74HC251DB-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC251DB-Q100J Signal Switches / Multiplexers / Decoders applications.
- VGA
- Enabling block of memory depending on address in memory chips
- Medium scale TV wall
- Data demultiplexing
- Data transfer
- Computer memory
- Signal router
- Solenoid cooling fan
- Frequency multiplexing system
- HD surveillance system
