banner_page

74HC257PW-Q100J

16 Terminations2V~6V Signal switchAutomotive, AEC-Q100, 74HC Series 1 Outputs4 Functions


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74HC257PW-Q100J
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 568
  • Description: 16 Terminations2V~6V Signal switchAutomotive, AEC-Q100, 74HC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100, 74HC
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Resistance 1kOhm
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 16
Number of Outputs 1
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2V
Family HC/UH
Number of Inputs 2
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Output Polarity TRUE
Voltage Supply Source Single Supply
Independent Circuits 1
Length 5mm
Width 4.4mm
RoHS Status ROHS3 Compliant

74HC257PW-Q100J Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Multiplexer as the analog IC.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.Since they are members of the Automotive, AEC-Q100, 74HC series, they can be used in a wide variety of applications.Among its basic configurations are 16 terminations.For multiplexer's system, 5V voltage is supplied.This turn signal switch consists of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.As you can see, it is mounted in the direction of Surface Mount.Among the family of HC/UH the logic switch is a member.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.As a result, the turn signal switch consists of 1 outputs.This multiplexer provides 2 inputs.The resistance of the signal switching is 1kOhm.

74HC257PW-Q100J Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package

74HC257PW-Q100J Applications


There are a lot of Nexperia USA Inc. 74HC257PW-Q100J Signal Switches / Multiplexers / Decoders applications.

  • Enabling block of memory depending on address in memory chips
  • Textile mills
  • Microprocessor memory systems
  • Combinational circuit
  • Data transfer
  • Speed synchronization of multiple motors in industries
  • Transmission from the computer system of a satellite
  • Paper plants
  • Data distribution
  • RF-based home automation system

Write a review

Note: HTML is not translated!
    Bad           Good