Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2008 |
Series |
74HC |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Multiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method |
BULK PACK |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC258 |
Pin Count |
16 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Circuit |
4 x 2:1 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Family |
HC/UH |
Number of Inputs |
2 |
Output Characteristics |
3-STATE |
Current - Output High, Low |
7.8mA 7.8mA |
Output Polarity |
INVERTED |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
29 ns |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
74HC258D,652 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tube.For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC Multiplexer is used.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HC series are suitable for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74HC258, which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.Among the family of HC/UH the logic switch is a member.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.Normally, 2/6V is powered by a battery.As a result, the turn signal switch consists of 1 outputs.This multiplexer has 2 inputs.The switches is packaged according to the way of BULK PACK.
74HC258D,652 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Power supplies of 2/6V
74HC258D,652 Applications
There are a lot of NXP USA Inc. 74HC258D,652 Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- HD surveillance system
- Decimal decoder
- Recording transmission
- Injectors
- Steel plants
- Memory chips
- Code conversion
- Automatic Monitoring systems
- To select different devices in microprocessor input