74HC259PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC259 |
| Pin Count | 16 |
| Output Type | Standard |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Bits | 8 |
| Propagation Delay | 18 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HC/UH |
| Logic Function | D-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC259PW,112 Overview
16-TSSOP (0.173, 4.40mm Width) contains it. It is packaged in the way of Tube. It uses Standard as its output configuration. There is a logic type of D-Type, Addressable associated with this electrical device. Surface Mount is used to mount this electronic part. A 2V~6V supply voltage is required to operate it. During operation, the temperature is set at -40°C~125°C. An FPGA in this series belongs to the 74HC family. Electronic parts with 8 bits are designed for this application. This device is designed with 16 terminations. This type belongs to the 74HC259 family. In order to operate it, the supply voltage must be 5V. 16 pins are included. It is a member of the HC/UH family of electronic devices. 16 pins are used in its design. Surface Mount is the method used for mounting this electronic part. There is a maximum voltage supply (Vsup) that reaches 6V. (Vsup) should be greater than 2V. High efficiency requires a supply voltage of 5V. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. This object is composed of 1 elements.
74HC259PW,112 Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
1 elements
74HC259PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC259PW,112 Latches applications.
- Shift register
- Decade counting 7-segment decimal display
- Double bus register system
- Flip-flops
- Control circuits
- Digital bus buffer
- Stacked or Push-Down Registers
- Serial Output Register
- Address register
- Automotive Body Electronics
