74HC273DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 122MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC273DB,118 Overview
In the form of 20-SSOP (0.209, 5.30mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. Currently, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74HC series. This D flip flop should not have a frequency greater than 122MHz. A total of 1 elements are present. A total of 20terminations have been recorded. The 74HC273 family contains it. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 3.5pF farads at the input. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. The flip flop is designed with 8bits. It reaches 6Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. In order to ensure high efficiency, the supply voltage should remain at 5V. It is reported that there are 8 input lines. Despite external influences, it consumes 8μAof quiescent current.
74HC273DB,118 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
74HC273DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC273DB,118 Flip Flops applications.
- Modulo – n – counter
- Shift registers
- Load Control
- Automotive
- QML qualified product
- ESD protection
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Memory
