74HC273N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC273 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 122MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 225 ns |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC273N,652 Overview
The package is in the form of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. Currently, the output is configured to use Non-Inverted. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. A temperature of -40°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74HCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 122MHz. In total, it contains 1 elements. During its operation, it consumes 8μA quiescent energy. 20terminations have occurred. The object belongs to the 74HC273 family. The power supply voltage is 5V. This JK flip flop has a 3.5pFfarad input capacitance. Devices in the HC/UHfamily are electronic devices. The RS flip flops belongs to FF/Latches base part number. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. In light of its reliable performance, this T flip flop is well suited for BULK PACK. The power supply is 2/6V.
74HC273N,652 Features
Tube package
74HC series
2/6V power supplies
74HC273N,652 Applications
There are a lot of NXP USA Inc. 74HC273N,652 Flip Flops applications.
- Storage registers
- Cold spare funcion
- ESD protection
- Parallel data storage
- Frequency division
- Frequency Dividers
- Frequency Divider circuits
- Automotive
- Latch-up performance
- ESCC
