74HC273PW,118
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Voltage | 6V |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 122MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
74HC273PW,118 Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74HCseries contain this type of chip. Its output frequency should not exceed 122MHz. The element count is 1 . Terminations are 20. D latch belongs to the 74HC273 family. It is powered by a voltage of 5V . JK flip flop input capacitance is 3.5pF farads. Devices in the HC/UHfamily are electronic devices. It is mounted by the way of Surface Mount. There are 20pins on it. This device has Positive Edgeas its clock edge trigger type. The design is based on 8bits. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 25mA . A total of 8input lines have been provided. In terms of quiescent current, it consumes 8μA .
74HC273PW,118 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
74HC273PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC273PW,118 Flip Flops applications.
- Circuit Design
- Single Down Count-Control Line
- Balanced Propagation Delays
- Individual Asynchronous Resets
- High Performance Logic for test systems
- Count Modes
- ESD performance
- 2 – Bit synchronous counter
- Cold spare funcion
- Computers
