74HC299N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC299 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8-Bit |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | Universal Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 60 ns |
| fmax-Min | 17 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HC299N,652 Overview
The package 20-DIP (0.300, 7.62mm) contains this file embedded in it. In this case, it is packaged in the same way as Tube. 8-Bit circuits are used to achieve its superior flexibility. Logic type Universal Shift Register is used on this electrical device. In this case, the electronic part is mounted in the direction of Through Hole. The operating temperature should be higher than -40°C~125°C. In addition, 6mA 6mA features the highest level of flexibility in its design due to its high and low output currents. It is a type of FPGA that belongs to the 74HC series of FPGAs. The voltage at which it operates is 2V~6V. It is a member of the 74HC299 family. In 20 terminations, a transmission line is terminated with an impedance-matched device. In order to maintain normal operation of the device, the supply voltage should remain above 5V. The 20 pin count is provided. With 8 Bits, you can design electronic parts in a very flexible way. This one belongs to the HC/UH family of electronic devices, and there are a number of other devices like it that are part of this family. A maximum supply voltage (Vsup) is reached at 6V. A higher voltage supply (Vsup) should be used. A 2/6V power supply is used to operate it. It uses POSITIVE EDGE for its trigger. There is also another characteristic of it that has to do with HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. I have included this part in Shift Registers as well.
74HC299N,652 Features
20-DIP (0.300, 7.62mm) package
74HC series
74HC299 family
20 pin count
2/6V power supplies
74HC299N,652 Applications
There are a lot of NXP USA Inc. 74HC299N,652 Universal Bus Functions applications.
- Push button switches
- Printer IC
- Massager
- Square wave oscillators
- Light-activated burglar alarm
- Flip flops
- Industrial Controls
- Communication
- Television
- Audio
