74HC299PW,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC299 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8-Bit |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 300 ns |
| Quiescent Current | 8μA |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | Universal Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74HC299PW,112 Overview
The package 20-TSSOP (0.173, 4.40mm Width) includes it. In the way of Tube, it is packaged. The superior flexibility of 8-Bit circuits is achieved through their use. This electrical device has a logic type of Universal Shift Register. This electronic part is mounted in the way of Surface Mount. The operating temperature should be higher than -40°C~125°C. It features maximum design flexibility thanks to its High/Low output current. FPGAs in the 74HC series are this type. There is a supply voltage of 2V~6V that it operates on. It is a member of the 74HC299 family. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 20 terminations. In order to function normally, the supply voltage should be higher than 5V. The 20 pin count is provided. A 8-Bit electronic part was designed for this application. A Surface Mount-shaped electronic component is mounted here. The 20 pins are designed into it. In the family of HC/UH devices, this electronic device belongs. At this point, Vsup reaches its maximum value. It is recommended that the supply voltage (Vsup) be greater than 2V. Power comes from a 2/6V source. In this case, it is made up of 1 elements. There is a trigger configured with POSITIVE EDGE. Furthermore, it has the characteristic of HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL as well. This electrical part operates from a supply voltage of 5V. It is in this case that 8μA of quiescent current is consumed without being affected by external factors in any way.
74HC299PW,112 Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
74HC299 family
20 pin count
20 pins
2/6V power supplies
1 elements
74HC299PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC299PW,112 Universal Bus Functions applications.
- Printer IC
- Massager
- Urban rail vehicle
- Digital stopwatches
- Data transfer
- Telecommunications
- Electric car
- Scanner
- Flip flops
- Car
