Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
Series |
74HC |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74HC299 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8-Bit |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
300 ns |
Family |
HC/UH |
Logic Function |
Shift Register |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Current - Output High, Low |
6mA 6mA |
Logic Type |
Universal Shift Register |
Output Polarity |
TRUE |
Trigger Type |
POSITIVE EDGE |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
74HC299PW,118 Overview
There is an embedded version of it in the 20-TSSOP (0.173, 4.40mm Width) package. It is packaged in a way that resembles Tape & Reel (TR). Flexible 8-Bit circuits are used to achieve its superior performance. A Universal Shift Register is the logic type of the electrical device that we are discussing. The electronic part is mounted in Surface Mount-direction. The operating temperature should be higher than -40°C~125°C in order for the machine to function properly. High/Low output currents allow 6mA 6mA to have a maximum design flexibility. It is a type of FPGA that belongs to the 74HC series of FPGAs. The voltage at which it operates is 2V~6V. The 74HC299 family includes it. It can be said that there is a technique of terminating transmission lines that uses a device that matches the characteristics of the line impedance, called 20 terminations. For normal operation, the supply voltage must be kept above 5V in order for the device to function properly. There are 20 pins on it. The electronic part was designed using 8 Bits. It is mounted in the way of Surface Mount so that this electronic part can be seen. A 20-pin is used in this design. Devices in this family are known as HC/UH devices. Upon reaching 6V, the supply voltage (Vsup) reaches its maximum value. It should be possible to exceed 2V with the supply voltage (Vsup). 2/6V power supplies are used to power the device. 1 elements are included in it. There is a trigger configured with POSITIVE EDGE. In addition to this, it is also characterized by HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. An electrical part such as this one operates from a voltage of 5V as its supply voltage.
74HC299PW,118 Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
74HC299 family
20 pin count
20 pins
2/6V power supplies
1 elements
74HC299PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC299PW,118 Universal Bus Functions applications.
- VCR
- Mobile caravan
- Washing machine
- Various travel, camping, medical emergency appliances
- Induction cooker
- General AND Logic Operation
- Troubleshooting & Judgment
- Telecommunications
- Hair dryer
- Car refrigerator