74HC2G66DC,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC2G66 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 10V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 20ns, 27ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 175ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
74HC2G66DC,125 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~125°C TA. In total, there have been 8 terminations. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO switching are used to construct these analog switch ics. 2 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with 74HC2G66. Draining from a single voltage supply, this analog switch requires a voltage of 2V~10V.
74HC2G66DC,125 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74HC2G66DC,125 Applications
There are a lot of Nexperia USA Inc. 74HC2G66DC,125 Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- Imaging
- Automatic test equipment
- Avionics test equipment
- Public switching systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Automotive applications
- Industrial control systems
- Digital cross connects (DSX-1)
- Signal routing between systems
